Above is a video about my Bluetooth Audio Link board REV.1.
My revision 2 board is currently up on OSHPark, so go check that out!
http://oshpark.com/shared_projects/4JnDnzgH
Also if you have got a rev.1 board here are the instructions for making it work properly! Unfortunately there were some design changes needing to be made which I overlooked on rev.1. So here are the instructions:
[gview file=”https://doayee.co.uk/wp-content/uploads/2013/10/PCB-Fix-for-bluetooth-audio-link.pdf”]
In response to Corey, who requested a parts list for BAL Rev.2. Below is the Parts List for the REV.2 board, as exported from eagle, hope this helps:
[gview file=”https://doayee.co.uk/wp-content/uploads/2013/10/parts-list-2.pdf”]
Here is the schematic for the board:
Hi, I’m looking at purchasing your rev 2 board here from Oshpark, I was just trying to see if you had a parts list as well, so that I could total up cost and make sure I have matching footprints. Thanks!
I have added the parts list above 🙂 have fun! Note: I have also fixed a bug with the board, so it all should work fine for you, if it doesn’t, let me know! Thanks, Tom